Guides
Production guides
Hands-on methods, step by step, with starting settings. Useful whatever plugins you use; NAUPLY tools are mentioned with their actual status.
Plugin tutorials
Each plugin, step by step, with its real controls and an annotated screenshot.
5 min read
NAUPLY Stems tutorial: split a song into stems inside your DAW
Getting started with NAUPLY Stems: choose the number of tracks (2 to 10) and the quality, import a song, balance the stems in the mixer, drag or export them as WAV to your DAW, and lock the song to your project tempo.
Read the guide →4 min read
Repair AI tutorial: fix damaged audio, module by module
Getting started with NAUPLY Repair AI: presets, the order of the five modules (de-clip, de-click, de-hum, denoise, de-reverb), learning the noise, hearing what is removed and spectral repair.
Read the guide →3 min read
Vocora tutorial: a vocal chain set from your own voice
Getting started with NAUPLY Vocora: genre presets, voice analysis (ANALYZE), style and intensity, BUILD CHAIN, fine-tuning the modules and comparing with the original.
Read the guide →3 min read
MidiBrain tutorial: generate chords, bass and melody inside your DAW
Getting started with NAUPLY MidiBrain: tags, key, GENERATE and its 8 variations, shaping each part, piano roll, then MIDI or audio export to your DAW.
Read the guide →2 min read
Genesis tutorial: turn a sample into a playable synth preset
Getting started with NAUPLY Genesis: load a reference, ANALYZE & GENERATE, compare with the original, evolve the sound through generations and mutations, lock, save and layer sounds.
Read the guide →3 min read
Trill tutorial: sequenced trill bass, from pattern to held note
Getting started with NAUPLY Trill: playing the pattern, presets, the MOTIONAL PAD, editing the grid, +CHORD and WALK modes, MORPH and MIDI export.
Read the guide →2 min read
Clarea tutorial: clean up a podcast or voice-over recording
Getting started with NAUPLY Clarea: presets, the order of the six modules (Rumble, AI Denoise, De-reverb, Breath, Plosive, Leveler), hearing what is removed, MIX and limits on singing.
Read the guide →2 min read
Eqora tutorial: EQ on the spectrum, band by band
Getting started with NAUPLY Eqora: presets, high-pass, bands on the curve, Q with the mouse wheel, hunting resonances, Stereo / Mid / Side modes and comparing.
Read the guide →2 min read
Compra tutorial: set up a compressor, from control to ducking
Getting started with NAUPLY Compra: presets, ratio and threshold, attack and release, makeup, parallel compression, Clean / VCA / Opto characters and sidechain ducking.
Read the guide →2 min read
Limita tutorial: finish a master at the right level, without distortion
Getting started with NAUPLY Limita: presets, true peak and ceiling, LUFS target, input gain, equal-loudness listening (UNITY), integrated measurement and dither.
Read the guide →2 min read
Lontana Reverb tutorial: place a sound in space
Getting started with NAUPLY Lontana Reverb: aux send or insert, presets, Room / Hall / Plate / Ambience / Massive modes, decay, size, pre-delay, low cut, mix and Freeze.
Read the guide →2 min read
Transplant Master tutorial: copy the mix decisions of a reference
Getting started with NAUPLY Transplant Master (in development): a Transplant Track on each track, loading the reference, stem-by-stem comparison, choosing the corrections and saving a DNA.
Read the guide →
Production guides
4 min read
Vocal chain: the plugin order for a clear, upfront vocal
Cleanup, EQ, compression, de-esser, saturation, reverb and delay: the order of plugins in a vocal chain, what each step does and how to set it without damaging the voice.
Read the guide →3 min read
How to separate the stems of a song: vocals, drums, bass and instruments
How AI stem separation works, what it is for (remixes, practice, sampling, mix analysis), how to get the best result and what copyright law says.
Read the guide →3 min read
Mastering: the steps to a clean master in your DAW
Preparing the mix, comparing with a reference, EQ, multiband compression, saturation, limiter and target loudness in LUFS: the steps to a clean home master, and the mistakes to avoid.
Read the guide →3 min read
How to clean up a recording: background noise, hiss, clicks and reverb
Hiss, fan noise, 50/60 Hz hum, clicks, clipping and room echo: identify the problem, the repair order and the settings to clean a voice or instrument without artifacts.
Read the guide →
Comparisons
The main approaches, presented honestly, with the alternatives and the limits of each.
2 min read
Separate stems without uploading your songs: the local alternative
Online services or a local tool to separate the vocals, drums and bass of a song: what changes for privacy, for working in the DAW, and the limits of each approach.
Read the guide →2 min read
Repair a recording inside your DAW: the plugin alternative
A complete restoration suite or repair plugins inside the DAW: denoising, de-click, hum, clipping, reverb. What changes in the workflow, and the limits of each approach.
Read the guide →2 min read
Chord and melody generators: which approach to choose?
Chord generators, harmony assistants or full idea generators: what each approach does, how MidiBrain generates chords, bass, melody, arpeggio and counter-melody, and its limits.
Read the guide →