NAUPLY

The Studio Duo vocal chain

The Studio Duo vocal chain: Vocora and Calqua on the same vocal

Studio Duo brings together two plugins designed for vocals. Vocora analyzes your take and sets up a complete chain; Calqua compares your sound with a reference and corrects the difference. Used one after the other, they give a clean vocal in the color you want in a few clicks.

Products

Edition needed

  • Vocora and Calqua: sold separately or together in the Studio Duo bundle.

Steps

  1. 1Analyze the vocal

    Put Vocora on the vocal track, play a sung passage and click ANALYZE: Vocora measures sibilance, muddy lows and dynamics.

    NAUPLY Vocora →
  2. 2Build the chain

    Choose a STYLE (Podcast/Broadcast, Pop Vocal, Rap/Trap…) and an INTENSITY, then BUILD CHAIN. Every module stays adjustable by hand, and ORIGINAL compares with the raw vocal.

    NAUPLY Vocora →
  3. 3Load a reference into Calqua

    Add Calqua after Vocora and click “LOAD REFERENCE”: pick a vocal whose tone you like.

    NAUPLY Calqua →
  4. 4Capture your sound and set the amount

    Start playback and click “CAPTURE MY SIGNAL”. Then set the AMOUNT (30 to 60% is often enough); PRESERVE LOW END reduces the correction in the lows, and AUTO GAIN compensates the level so you can compare fairly.

    NAUPLY Calqua →

Good to know

  • Vocora and Calqua don't talk to each other: they complement each other on the same track, with no shared settings.
  • Vocora doesn't correct pitch: it's a mixing chain (EQ, de-esser, compression, presence, saturation, space).

Frequently asked questions

Can I use Calqua without Vocora?
Yes. Calqua works on its own, on a vocal, an instrument or the mix bus. So does Vocora. The Studio Duo bundle brings both together.
Which reference should I choose for Calqua?
A solo or very upfront vocal, in a style close to yours. A very different reference calls for a lower AMOUNT.

Go further

Other workflows